Opening : Mon-Sat 09:30 am- 06:30 pm

Lumen Light Source Series

admin

Order Now !!!

X

Lumen EX

Salient Features

X
  • Using the contact angle method it can be seen that 172 nm Excimer light rapidly removes contamination from glass surfaces in 30 seconds or less.
  • The strong dependence on distance to the sample results from the large absorbance of O2 at172 nm.
    This effect can be minimized by using a gas mixture with a smaller O2 fraction than air. We recommend a distance within 5 mm.
  • All ­in ­one light source built into the irradiation box .
  • High safety design system
  • Operate with AC100 V to AC240 V power supply.

Table

X

S. No.		ParameterLUMEN EX | LUMEN EX-Mini
1Emission wavelength172nm
2 Irradiance typ.65mW/cm2
3Irradiation area (W X H )400 mm × 38 mm / 86 mm X 40 mm
4Cooling methodForced-air cooling
5Lamp design life 2000 Hrs
6 Input Voltage (AC)200 V to 240 V , single phase 50Hz / 60Hz
7 Power consumption (Typical)320 VA | 150 VA
8Operating / storage temperaturerange+5 0C to +35 0C / -25 0C to +55 0C
9Operating / storage humidity range30 % to 80% / below 80% (no condensation)
10Control methodPanel control / external control
11Light Tight Sample Housing Inbuilt
12 No of Ports ≥ Communication Ports : 1 (RS-232C)
≥ External Control Ports : 1 (D-SUB15-PIN)
13Weight of Lamp with Housing< 11 Kg , (Power Supply: < 12.5Kg) | < 5 Kg
14 Dimensions (W x H x D) of Lamp & Housing< 750 mm x 180 mm x 120 mm | < 150 mm x 275 mm x 250mm
15Material of Sample HousingAluminum / Stainless Steel
16 Dimension of Sample Housing*1000 mm (L) x 200 mm (W) x 200 mm ( H) ± 10% | 500 mm (L) x 300 mm (W)x 200 mm ( H) ± 10%

PDF

X

» Multi Channel LED

Application

  • Microscopy
  • Spectroscopy
  • Photo catalysis
  • Medical imaging
  • Semiconductor equipment
  • Medical instruments
  • Machine vision

Salient Features

  • User friendly on board GUI and PC software
  • User can control Power, frequency, duty cycle of each channel separately
  • Provision for Collimated output as well as fiber coupled output
  • Compact, Better Stability and longer life

Note:
* Other wavelengths are also available
**Depends on the wavelength
***Depends on the operating Voltage and Current
****Especially design Collimator can also be provided for collimated
*****Housing shown in figure are for illustration purpose

LUMEN Light Source and LCx Driver are designed as an illumination source. A wide range of Wavelength to choose from Deep UV to till Far IR and Multi-Channel LED driver (4/8/10/12 Channel) make complete unit user friendly. User has freedom to select source power, internal delay, time of illumination, Model of operation, Modulation through touch panel.

Tap To View Table
Sl No ParameterSpecification
LED Light Source, Model : LUMEN LED
1Available Wavelengths(nm)* 265,280,310,350,365,380,405,450,510,525,590,660,730,808,850,940,1050,
1310,1550,3300,3900,4300, 2700K,3600K,5700K,6500K
2Wavelength Tolerance** ±10 nm
3FWHM(nm)** 10-50nm
4Output Power (mW)** 10uW to 100uW for fiber coupled wavelength dependent
5LED Output Collimated/Fiber Coupled
6Weight<500gm
7Dimension (mm) ~120 (L) x ~80 (W) x ~45 (H)
MultiChannel LED Controller, Model: LUMEN LCx
1Display 7 inch touch screen Display
2Number of Channel 12/10/8/4
3Power Supply Input Voltage (Vdc) 20V
4Maximum Output Voltage (Vmax)*** 3.8V
5Maximum Per Channel Output Current (Imax)*** 1,400mA
6Computer Interface USB 2.0
7Operation Modes 1.Internal Power control CW operation
2.Programmable frequency and Duty Cycle for on/off Modulation
8LED Power Range 0-100 %( steps of 25% or used defined)
9Pulse Width Modulation & Duty Cycle User definable up to 1000Hz & Up to 100% (Steps of 25%)
10LED Selection User definable
11SoftwareUser friendly application software with GUI
12Operating Temperature Range 0°C ~ 45°C
13Operation1. Individual
2. Simultaneously 12/10/8/4 Leds
14 External trigger Yes
15Weight <2 Kg,
16Dimension~175 mm (L) x ~220mm (W) x ~144mm (H)
17Warranty 1 Year
» LED Cluster with Controller

Application

  • Microscopy
  • Spectroscopy
  • Photo catalysis
  • Medical imaging
  • Semiconductor equipment
  • Medical instruments
  • Machine vision

Salient Features

  • User can control Power, frequency, duty cycle
  • High Power Collimated and Fiber coupled output
  • Compact, Better Stability and longer life

Note:
* Other wavelengths are also available
**depends on the wavelength
***depends on the operating Voltage and Current

New age instruments provides ready-to-use high-power LED light sources with integrated heat sinks and collecting optics (optional). Compact high-power light sources are designed as a universal light source for general lab use and OEM applications. The mechanical housing of light source contain multiple mounting features for lab and OEM application. It can be controlled through software and hardware (User defined).

Tap To View Table
Sl No ParameterSpecification
LED Cluster, Model :
LUMEN LED CL-xxxx
1Available Wavelengths(nm)* 365,405,450,510,525,590,660,730,808,850,940,1050
2Wavelength Tolerance** ±10 nm
3 FWHM(nm)**10-50nm
4Output Power (mW)**20mW to 5 Watt
5 LED OutputCollimated/Fiber Coupled
6Weight <350gm
7Dimension ~78 mm (L) x ~60mm (W) x ~60mm (H)
8coolingForce Cooling/TEC
LED Cluster Controller, Model: LUMEN CL Controller
1Power Supply Input Voltage (Vdc)18V
2 Maximum Output Voltage (Vmax)***3.8V
3Maximum Output Current (Imax)***1,400mA
4LED Power Range 0-100 % (through Knob )
5Operation Modes1.CW
2.Pulse
6Pulse Width Modulation & Duty Cycle User defined step through Knob
7Operating Temperature Range0°C ~ 45°C
8 External triggerOptional
9Weight<500gm
10Dimension~120mm (L) x ~80mm (W) x ~85mm (H)
11Warranty 1 Year
» Lumen Hal

Application

  • Absorption Measurement
  • Transmission measurement
  • Reflection Measurement

Salient Features

  • High Output Power
  • Wavelength Range to choose from 350nm to 2200 nm
  • Provision to integrated Filter Holder
  • Shutter Providing

From visible light to infrared, that’s where the Lumen Hal light source works best.It’s a compact, stabilized halogen light source with fiber connection, widely used for absorption and transmission measurements.

Tap To View Table

Sl No		ParameterSpecification
Halogen light Source
1Wavelength Range350-2200 nm
2Source Tungsten Halogen
3 Bulb PowerUp to 7W
4Output PowerUp to 10mW
5Pulse Power 2700K, 2800K, 3000K, 3200K
6ShutterProvided
7Bulb Life1000 hour
8Power Supply Input Voltage (Vdc) 12V
9Fiber ConnectionSMA 905/FC/PC
10Operating Temperature0°C ~ 45°C
11Weight<750gm
12Dimension~155 mm (L) x ~80mm (W) x ~154mm
13Warranty1 Year
Note: All required Manual Cables, Accessories Power Supply will be Supplied.
» Xenon Flash Lamp Module (Portable)

Application

  • Blood analyzers
  • Laboratory testing
  • Air pollution analysis
  • Water quality and pollution analysis
  • Microplate readers
  • Fluorescence Spectrophotometers
  • Semiconductor inspections
  • Light source for image processing

    More Coming Soon!

    Tap To View Table

    Parameter    		Specification
    Arc Size 1.5-3.0 mm
    Window material UV glass
    Emission wavelength range 185 to 200 nm
    Main discharge voltage variable range 400 to 600 V
    Main discharge capacitor0.22 / 0.11 / 0.047 / 0.28 µF
    Maximum input energy (per flash)See Operating Conditions
    Maximum average input (continuous)5 W
    Light output stability (Max.) 2.0 – 1.5 %CV
    Guranteed life 1 x 109 flashes
    Input voltage range 11 to 28 V
    Input current1 A
    Inrush current4 A
    Trigger inputRectangular wave 5 V to 10 V pulse width must be 10 µs or more
    Trigger input impedance330 Ω
    Cooling methodNot required
    Weight (standard type)Approx. 155 g
    Operating temperature range0 to +40 ˚C
    Storage temperature range -40 to +40 ˚C

    Accessories

    » Fiber Optic Cable

    • Core Diameter: 1500μm, 1000μm, 800μm, 600μm, 400μm, 200μm,100um
    • Length: 2 meter / 1 meter
    • SMA/FCPC
    • Wavelength: 200-2500nm
    • Metal Jacketing

    » Multi-Furcated Fiber-Optic Cabels

    • Core Diameter: 600μm, 400μm, 200μm, 100um
    • Furcation: 4//5/6/8/10/12 : 1
    • Splitting Point: at the Middle with SMA/FCPC Connector
    • Wavelength: 200-2500nm
    • Metal Jacketing

    » Fiber Combiner

    • Wavelength: 200-2500nm
    • Spectral sampling attachment
    • Collimation and focusing
    • SMA/FCPC

      » Collimating Lens

      • Lens Diameter:6mm, 25mm
      • Lens focal length: 8.7mm, 50mm, 100mm
      • Wavelength range: 200-2500nm
      • Fiber Connection: SMA or FCPC

      » Fiber Optic Attenuator

      • Connector: SMA at both end
      • Intensity attenuation up to 0 to 100% through knob Manually
      • Slot to hold 12.5 mm filter and Material: Aluminum
      • Provision to mount over the breadboard
      • Included with Collimating lens at both end to increase the coupling Efficiency

      » Beam Expander

      • Expansion power: 2X, 5X, 10X
      • Coating: NIR II Range, Visible Range
      • Entrance aperture: ≥2.5mm
      • Exit aperture: ≥10mm
      • Substrate: Optical glass
      • Angle of Incidence (°): 0
      • Transmission: >96%
      • Mounting threads in housing: M22x0.75
      wpChatIcon