Our Products
- UV-Blaster ™ Series
- Laser
- Light Sources
- General Purpose Optics
- Raman System
- Large Size Optics
- Crystals, AO & EO Components
- Industrial Laser Consumables
- Sensors & Module
- Cameras
- Fiber Optics & Components
- Laser Diagnostic
- Spectroscopy Instruments & Opto Electronics
- Molecular & Elementary Analyzer
- Optical Metrology
- Solar PV & LED Test System
- Lab Environment Control System
- Opto Mechanical
- Customized Solutions for Scientific Research
- Adaptive Optics and Wavefront Sensors
Butterfly LaserMounts
207 Series LaserMounts
DIL LaserMounts
Laser/LED LaserMounts
TO-Can LaserMounts
240 Series LaserMounts
260 Series LaserMounts
274 TECMount
280 Series TECMounts
MultiMount Modular Fixture System
»Butterfly LaserMounts
The model 203 & 205 Butterfly LaserMounts offer solutions for 14-pin and 7-pin butterfly lasers. With zero-insertion-force (ZIF) sockets and fully configurable wiring, these fixtures integrate quickly into your test setup.
BUTTERFLY LASERMOUNTS FEATURES
The 203 and 205 LaserMounts provide an excellent solution to thermal management and electrical connections of butterfly laser modules. With both active and passive temperature control options, you can pick the mount that best fits your application needs.
The Butterfly LaserMounts support both 14-pin butterflies as well as packages with 7-pins on one side and an SMA/RF connector on the other. Loading of the device is made simple zero insertion force sockets, and configuring the mount to the pin-out of your device is done with a solderless terminal strip.
Each mount makes their laser driver and temperature controller connections through a DB-9 LDD and one (or two for TEC controlled versions) DB-15 TEC connector(s) on the back of the mount. This allows for quick connections to any Arroyo Instruments controllers.
UNIVERSAL WIRING INTERFACE
An easy screw terminal block with color coded wires makes setup simple for any pin configuration.
QUICK LASER LOADING
Zero-Insertion Force (ZIF) sockets create secure electrical connections in seconds.
ACTIVE HEATING AND COOLING (MODEL 205)
The 205 LaserMount includes a built-in Peltier device and temperature sensor for bi-polar temperature control.
COPPER COLD PLATE (MODEL 205)
100% copper cold-plate with hard nickel plating for maximum performance and scratch resistance.
STANDARDIZED CABLE CONNECTORS
Connect to Arroyo Instruments laser drivers and temperature controllers with standard DB-9 and DB-15 cables.
OPTIONAL FIBER MANAGEMENT TRAY
Add the fiber management tray for easy handling of even fine optical fibers.
»207 Series LaserMounts
The 207 LaserMount offers dependable thermal control for the many LEDs and medium-powered fiber pigtailed lasers in the 5 to 10 watt range. With a user-configurable quick-disconnect electrical interface and broad device support, the 207 is an excellent choice.
207 SERIES FEATURES
The 207 Series LaserMounts provide an excellent solution to thermal management and electrical connections of lower power fiber pigtail lasers and LEDs. With both active temperature control, you’ll have confidence that your device temperature is where its supposed to be
The 207 comes with a wide variety of mounting hole for various devices. If your device is not supported, contact the factory about a custom cold plate to meet your exact mounting needs.
Each mount makes their laser driver and temperature controller connections through a DB-9 LDD and DB-15 TEC connector(s) on the back of the mount. This allows for quick connections to any Arroyo Instruments controllers.
UNIVERSAL WIRING INTERFACE
An easy screw terminal block makes setup simple for any pin configuration. Pre-fabricated laser harnesses are available for many supported lasers.
ACTIVE HEATING AND COOLING
The 207 LaserMount includes a built-in Peltier device and temperature sensor for bi-polar temperature control.
CUSTOMIZABLE COPPER COLD PLATE
100% copper cold-plate with mounting holes for common lasers and LEDs. Hard nickel plating for maximum performance and scratch resistance. Custom mounting configuration available.
OPTIONAL HIGH TEMPERATURE MODE
Available in an optional high temperature configuration, allowing operation up to 150 ºC.
STANDARDIZED CABLE CONNECTORS
Connect to Arroyo Instruments laser drivers and temperature controllers with standard DB-9 and DB-15 cables.
»DIL LaserMounts
The model 213 & 215 DIL LaserMounts are an excellent choice for electrical connection and thermal management of 14-pin DIL and 8-pin mini-DIL lasers. These mounts feature zero-insertion-force (ZIF) sockets and fully configurable wiring.
213/215 SERIES FEATURES
The DIL LaserMounts provide an excellent solution to thermal management and electrical connections of DIL laser modules. With both active and passive temperature control options, you can pick the mount that best fits your application needs.
The DIL LaserMounts support both 14-pin DIL lasers as well as the smaller 8-pin mini-DIL packages (213 LaserMount only).
Loading of the device is made simple zero insertion force sockets, and configuring the mount to the pin-out of your device is done with a solderless terminal strip.
UNIVERSAL WIRING INTERFACE
An easy screw terminal block with color coded wires makes setup simple for any pin configuration.
QUICK LASER LOADING
Zero-Insertion Force (ZIF) sockets create secure electrical connections in seconds.
ACTIVE HEATING AND COOLING (MODEL 215)
The 215 LaserMount includes a built-in Peltier device and temperature sensor for bi-polar temperature control.
COPPER COLD PLATE (MODEL 215)
100% copper cold-plate with hard nickel plating for maximum performance and scratch resistance.
STANDARDIZED CABLE CONNECTORS
Connect to Arroyo Instruments laser drivers and temperature controllers with standard DB-9 and DB-15 cables.
OPTIONAL FIBER MANAGEMENT TRAY
Add the fiber management tray for easy handling of even fine optical fibers.
»Laser/LED LaserMounts
The 226 LED LaserMount is a full-featured fixture with integrated temperature control and easy device connections.
Laser/LED LaserMounts
The LED LaserMount support LED Devices with active cooling, and easy configuration and device connections.
The 226 is an excellent solution for LED applications where temperature stabilization is needed. Connections are easy with the 2mm banana jacks on the side of the mount, making it easy to connectorize your device. In addition to the STAR hole pattern, the 226 also features a grid of additional holes in a “breadboard” pattern, which be used for mounting custom
ACTIVE HEATING AND COOLING
Includes a built-in Peltier device and temperature sensor for bi-polar temperature control.
CUSTOMIZABLE COPPER COLD PLATE
100% copper cold-plate with breadboard and STAR LED mounting holes. Hard nickel plating for maximum performance and scratch resistance. Custom mounting configuration available.
STANDARDIZED CABLE CONNECTORS
Connect to Arroyo Instruments laser drivers and temperature controllers with standard DB-9 and DB-15 cables.
Quick Disconnects
Two 2mm banana jacks in the side of the mount allow quick electrical connections. One set of leads is included with the mount.
Minimal Light Absorption
The clear anodized aluminum material absorbs a minimum of light when used within an integrating sphere.
»TO-Can LaserMounts
The 224 and 234B TO-Can LaserMounts are full-featured laser fixtures with integrated temperature controls and easy device connections, built for TO-Can laser packages.
TO-CAN LASERMOUNT FEATURES
The TO-Can LaserMounts support TO-Can with active cooling, and easy configuration and device connections. The 234B is a more powerful version of the 224 and supports high-power TO-can devices as well as 2-pin devices.
ACTIVE HEATING AND COOLING
Includes a built-in Peltier device and temperature sensor for bi-polar temperature control.
STANDARDIZED CABLE CONNECTORS
Connect to Arroyo Instruments laser drivers and temperature controllers with standard DB-9 and DB-15 cables.
WIRE-FREE CONFIGURATION
Insert the laser device without soldering or wiring. Switches select anode or cathode configuration, and earth ground connection.
CAGE AND LENS TUBE SYSTEMS SUPPORTED
30mm CAGE systems are natively supported, or add an accessory cover for 1″ lens tube supprt.
NITROGEN PURGE
The included 1/16″ barbed nozzle adapts to a nitrogen supply to eliminate condensation around the laser device during low-temperature operation.
COPPER COLD PLATE
100% copper cold-plate with mounting holes for common lasers and LEDs. Hard nickel plating for maximum performance and scratch resistance.
»240 Series LaserMounts
The 240 Series LaserMounts support C-Mount, HHL, and TO-3 devices for high performance and long term operation. All mounts feature solderless connections and an integrated fan for maximum thermal performance. Each fixture includes a removable pedestal, and is easily mounting to an optical table.
240 SERIES FEATURES
The 240 Series LaserMounts are designed to provide high performance and long term operation. Supporting C-Mount, HHL, and TO-3 devices, the 240 Series is an excellent way to connect to and thermally manage your device.
All mounts feature solderless connections for quick setup, and an integrated fan for maximum thermal performance.
Each 240 Series mount is a post-mounted fixture, and a pedestal is included with the mount. For custom applications, the pedestal can be removed, and both ¼-20
COPPER COLD PLATE (MODEL 242)
100% copper cold-plate with mounting holes for common lasers and LEDs. Hard nickel plating for maximum performance and scratch resistance.
WIRE-FREE CONFIGURATIONS
Connect to the laser device without soldering or wiring.
PASSIVE COOLING (MODEL 244 & 246)
Take advantage of the 0.5ºC-per-Watt cooling efficiency of Models 244 and 246 to maintain low package temperatures.
ACTIVE HEATING AND COOLING (MODEL 242)
The 246 LaserMount includes a built-in Peltier device and temperature sensor for bi-polar temperature control.
NITROGEN PURGE (MODEL 242)
The included 1/8″ barbed nozzle adapts to a nitrogen supply to eliminate condensation around the laser device during low-temperature operation.
STANDARDIZED CABLE CONNECTORS
Connect to Arroyo Instruments laser drivers and temperature controllers with standard DB-9 and DB-15 cables.
»260 Series LaserMounts
The 260 Series LaserMounts are designed to provide high performance and long-term operation. Wire harnesses for various types of lasers are available. Each 260 Series mount can be bolted to an optical table or work surface using holes matching the 1” centers of most optical tables.
260 SERIES FEATURES
The 260 Series LaserMounts are designed to provide high performance and long term operation. All mounts feature solderless connections for quick setup, and an integrated fan for maximum thermal performance. Each 260 Series mount can be bolted to an optical table or work surface using holes matching the 1″ centers of most optical tables.
The 260 Series is available in either active temperature control or passive. If your design is not supported by the standard mount, either version can be customized to match your mounting hole requirements.
Using a bread board hole pattern found on optical tables, the 264-BB provides a grid of threaded holes for maximum flexibility in mounting your thermal load. Be it a laser device, optic platform, or other application, the bread board configuration gives you excellent long term flexibility in how to mount your loads.
CUSTOMIZABLE COPPER COLD PLATE
100% copper cold-plate with mounting holes for common lasers and LEDs. Hard nickel plating for maximum performance and scratch resistance. Custom mounting configuration available.
PASSIVE COOLING (MODEL 262)
Take advantage of the 0.25ºC-per-Watt cooling efficiency of the Model 262 to maintain low package temperatures.
ACTIVE HEATING AND COOLING (MODEL 264)
The 264 LaserMount includes a built-in Peltier device and temperature sensor for bi-polar temperature control.
STANDARDIZED CABLE CONNECTORS
Connect to Arroyo Instruments laser drivers and temperature controllers with standard cables.
NITROGEN PURGE (OPTIONAL)
The optional 260-C cover with available 1/8″ barbed nozzle adapts to a nitrogen supply to eliminate condensation around the laser device.
»274 TECMount
The 274 TECMount provides a powerful cooling platform designed to meet demanding temperature control requirements With the use of water cooling, the 274 achieves up to 180W cooling capacity! Customize the 3.2” cold plate according to your project requirements.
274 TECMOUNT FEATURES
The 274 TECMount offers excellent cooling performance in a small footprint. By employing water cooling, the 274 achieves up to 180W cooling capacity when using 20C water (even more capacity with lower water temperatures).
The 274 is an actively cooled mount, which means there is an integrated TEC to precisely control the plate temperature. The cold plate is hard nickel-plated copper for maximum thermal performance.
Water cooling enables a small form factor by using water, instead of air, to remove the waste heat from the system. Because the plate is actively cooled with a TEC, actual water temperature is not critical, although lower water temperatures does increase thermal capacity of the mount.
ACTIVE HEATING AND COOLING
The 274 LaserMount includes a build-in Peltier device and temperature sensor for bi-polar temperature control, up to 180 Watts.
CUSTOMIZABLE COPPER COLD PLATE
100% copper cold-plate with mounting holes for common lasers and LEDs. Hard nickel plating for maximum performance and scratch resistance. Custom mounting configuration available.
ADAPTOR PLATES (OPTIONAL)
3.2”, 4.2”, 5.2” Adaptor Plates available
TEMPERATURE SENSOR SWITCH
Does your device have an onboard temperature sensor? Flip a switch to bypass the mount’s cold plate sensor and send the signal directly to your temperature controller.
»280 Series TECMounts
The 280 Series TECMounts are designed for high power temperature control for both laser and non-laser applications. With larger cooling plates and higher capacities, the 280 Series TECMounts provide the next level of flexibility, capability, and control.
280 SERIES FEATURES
The 280 Series TECMounts are designed to provide high thermal capacities in a compact and functional enclosure, with 30W and 100W models available. Precision engineered and ready to go right out of the box, these mounts come with a very flexible array of mounting holes and the temperature sensor built-in. Need to use the device for temperature feedback? No problem, you can easily wire in the device’s sensor and even select between device and internal temperature feedback with a switch on the mount.
The 280 Series Mounts are available in an optional high temperature configuration, allowing for operation up to 150°C, but retaining the temperature range and thermal capacity of the standard mount. Because thermistors do not perform well at high temperatures, the sensor is replaced with a high accuracy Pt 100 RTD sensor. There is additional cost for the high temperature configuration, please contact the factory for a quote.
Like many of our other mounts, the cold plate can be customized to fit the exact requirements of your application. We can put mounting holes just where you need them so your device mounts directly to the plate, without the need for adapters or modification.
ACTIVE HEATING AND COOLING
Built-in Peltier devices and a temperature sensor for bi-polar temperature control.
CUSTOMIZABLE COPPER COLD PLATE (MODEL 284 & 286)
100% copper cold-plate with mounting holes for common lasers and LEDs. Hard nickel plating for maximum performance and scratch resistance. Custom mounting configuration available.
CUSTOMIZABLE ALUMINUM COLD PLATE (MODEL 285)
100% aluminum cold-plate with mounting holes for common lasers and LEDs, and hard nickel plating for maximum performance and durability. Custom mounting configurations available.
FLEXIBLE MOUNTING SURFACE (MODEL 285)
Engineered to provide edge access on three sides of the cold plate.
TEMPERATURE SENSOR SWITCH
Does your device have an onboard temperature sensor? Flip a switch to bypass the mount’s cold plate sensor and send the signal directly to your temperature controller.
»MultiMount Modular Fixture System
Overview
Designed to work in conjunction with the 7000 MultiSource, the 7700 Series MultiMount Modular Fixture System provides cooling solutions based on a standard platform that can be quickly customized to meet application requirements.
Active or Passive Cooling
TThe 7700 Series is available in either active or passive temperature control. If your device is not supported by a standard mount, either version can be customized to match your mounting hole requirements.
Bread Board Cold Plate
Using a bread board hole pattern found on optical tables, some mounts in the 7700 Series provide a grid of threaded holes for maximum flexibility in mounting your thermal load. Be it a laser device, optic platform, or other application, the bread board configuration gives you excellent long term flexibility in how to mount your loads.
Custom Mounting Options
The 7700 Series is intended to be rapidly customizable to meet differing application requirements, so contact us and we’ll work with you to quickly get a solution into your hands.
