Our Products
- UV-Blaster ™ Series
- Laser
- Light Sources
- General Purpose Optics
- Raman System
- Large Size Optics
- Crystals, AO & EO Components
- Industrial Laser Consumables
- Sensors & Module
- Cameras
- Fiber Optics & Components
- Laser Diagnostic
- Spectroscopy Instruments & Opto Electronics
- Molecular & Elementary Analyzer
- Optical Metrology
- Solar PV & LED Test System
- Lab Environment Control System
- Opto Mechanical
- Customized Solutions for Scientific Research
- Adaptive Optics and Wavefront Sensors
SPARK:”LASER IGNITION SYSTEM”
- SPARK LASER IGNITION SYSTEM is a high power laser diode source and control system is a completely integrated, turn-key seven channel system for R&D and industrial testing purpose. This preconfigured system gives the user full control over the high power laser diodes. The user can adjust each laser diode optical power as well as each channel to operate in CW or pulse mode. Each fiber coupled laser diode is mounted on the TEC cooled mounting plate inside the instrument. The laser is precisely calibrated and controlled to deliver a high stable output. This system is all inclusive of laser diode, peltier cooler, their individual drivers.
- Lasers
- 440 nm – 10W
- 525 nm – 3W
- 808 nm – 10W
- 878 nm – 6W
- 940 nm – 10W
- 980 nm – 10W
- 1064 nm – 10W
| Number of Laser Diode Channels per System | 7(or as per requirement) |
|---|---|
| Laser Diode Adjustable Output Power (each channel) | 0 to Max Power (max power is wavelength specific) |
| Fiber Termination | SMA905, FC/APC (based on type of laser) |
| Fiber Numeric Aperture (NA) | 0.22 |
| Fiber Core Diameter | 400 µm (200 µm on request) |
| Detachable Fiber Outputs | 7 x Rear Panel Outputs |
| Typical laser Diode Spectral Line Width (FWHM, typical, 3 dB) | 5 nm |
| CHANNEL CONTROL UNIT LASER DIODE PROTECTION FEATURES | |
| Factory Pre-Set Maximum Current Limit | |
| ESD and Power Surge protection | |
| Reverse Voltage Transient protection | |
| AC Line Filter | |
| Keylock Switch and Safety Interlock | |
| Side Panel e-Stop Button Emergency Shut-Down | |
| SYSTEM DIMENSIONS AND POWER REQUIREMENT | |
| System Height | 750 mm x 580 mm x 400 mm |
| Input Power | Universal 1 00V – 230 VAC, 50/60Hz (request shore power requirements for your configuration) |
| System Weight | approx 100 Kg |
| MAINFRAME USER INTERFACE | |
| All the lasers are controlled using single GUI. | |
| LabView Drivers Included | |
| GUI Control Software Included |
