Our Products
- UV-Blaster ™ Series
- Laser
- Light Sources
- General Purpose Optics
- Raman System
- Large Size Optics
- Crystals, AO & EO Components
- Industrial Laser Consumables
- Sensors & Module
- Cameras
- Fiber Optics & Components
- Laser Diagnostic
- Spectroscopy Instruments & Opto Electronics
- Molecular & Elementary Analyzer
- Optical Metrology
- Solar PV & LED Test System
- Lab Environment Control System
- Opto Mechanical
- Customized Solutions for Scientific Research
- Adaptive Optics and Wavefront Sensors
- UV-Blaster ™ Series
- Laser
- Light Sources
- General Purpose Optics
- Raman System
- Large Size Optics
- Crystals, AO & EO Components
- Industrial Laser Consumables
- Sensors & Module
- Cameras
- Fiber Optics & Components
- Laser Diagnostic
- Spectroscopy Instruments & Opto Electronics
- Molecular & Elementary Analyzer
- Optical Metrology
- Solar PV & LED Test System
- Lab Environment Control System
- Opto Mechanical
- Customized Solutions for Scientific Research
- Adaptive Optics and Wavefront Sensors
GHz Variable Gain Voltage Amplifiers
High-Speed GHz Amplifiers
»GHz Variable Gain Voltage Amplifiers
- Variable gain up to 70 dB (approx. × 3000), switchable in 10 dB steps
- Bandwidth 1 kHz to 1.2 GHz
- Bandwidth independent of gain setting (guaranteed)
- Noise figure down to 1.9 dB (330 pV/√Hz)
- Local and remote gain control
APPLICATIONS
- Oscilloscope and transient recorder preamplifier
- Photomultiplier and microchannel plate amplifier
- Signal booster for optical receivers and current amplifiers
- Time-resolved pulse and transient measurements
- Automated measurement systems
Indication of selected gain setting by LED. Output short-circuit protected. Power supply via 3-pin Lemo® socket. A mating connector is provided with the device. Optional power supply PS-15 available. For further information please view the datasheet.
| Model | DUPVA-1-60 | DUPVA-1-70 |
|---|---|---|
| Lower Cut-Off-Frequency | 1 kHz | 1 kHz |
| Upper Cut-Off-Frequency | 1.2 GHz | 1.1 GHz |
| Rise/Fall Time | 380 ps | 390 ps |
| Gain | 20/30/40/50/60 dB | 30/40/50/60/70 dB |
| Input Noise | NF 3.0 dB (450 pV/√Hz) | NF 1.9 dB (330 pV/√Hz) |
| Output Power | 13 dBm (−1 dB compression @ 100 MHz) | 12 dBm (−1 dB compression @ 100 MHz) |
| Power Requirements | ±15 V, +350 mA / −100 mA , typ. | ±15 V, +250 mA / −100 mA, typ. |
| Input/Output | 50 Ω, SMA connector | |
| Monitor Output | DC – 100 kHz monitor output at D-Sub connector, gain of 1 | |
| Control Interface | 3 opto-isolated digital inputs, TTL/CMOS compatible | |
| Dimensions | 165 x 105 x 45 mm (L x W x H), weight 510 g (1.1 lbs) |
Technical Brochure
»High-Speed GHz Amplifiers
- Ultra-wide bandwidth from 10 kHz up to 2.5 GHz
- Gain up to 60 dB (× 1,000)
- Transimpedance gain with photodetectors up to 50,000 V/A
- Very low input noise down to 310 pV/√Hz (6.2 pA/√Hz)
- Integrated DC-current path for biased photodetector applications
Only HSA-Y series:
- Two identical signal outputs
- DC-monitor output
APPLICATIONS
- Preamplifier for ultra-fast detectors (microchannel plates photomultipliers avalanche photo-diodes and PIN photodiodes)
- Oscilloscope and spectrum/network analyzer preamplifier
- Time-resolved pulse and transient measurements
- Signal booster in 50 Ω high-speed systems
| HSA-X Models | HSA-X-1-40 | HSA-X-2-20 | HSA-X-2-40 | HSA-X-I-2-40 |
|---|---|---|---|---|
| Lower Cut-Off-Frequency | 10 kHz | 10 kHz | 10 kHz | 10 kHz |
| Upper Cut-Off-Frequency | 1.2 GHz | 2.5 GHz | 2.0 GHz | 2.2 GHz |
| Rise/Fall Time | 290 ps | 140 ps | 180 ps | 160 ps |
| Gain | 40 dB (× 100) | 20 dB (× 10) | 40 dB (× 100) | 40 dB (× 100) inverting |
| Transimpedance* | 5,000 V/A | 500 V/A | 5,000 V/A | 5,000 V/A inverting |
| Input Noise [/√Hz]** | 310 pV (6.2 pA) | 610 pV (12.2 pA) | 620 pV (12.4 pA) | 430 pV (8.6 pA) |
| Input VSWR | 1.6 : 1 | 1.23 : 1 | 1.4 : 1 | 1.25 : 1 |
| Maximum Output Voltage @ 50 Ω | 2 VPP | 2 VPP | 1.9 VPP | 2 VPP |
| Output VSWR | 1.35 : 1 | 1.4 : 1 | 2.5 : 1 | 1.4 : 1 |
| Power Requirements | +15 V, +140 mA, typ. | +15 V, +105 mA, typ. | +15 V, +125 mA, typ. | +15 V, +140 mA, typ. |
| Input/Output | 50 Ω, SMA | |||
| Dimensions | 80 x 45 x 25 mm (L x W x H), weight 100 g (0.23 lb) |
| HSA-Y Models | HSA-Y-1-40 | HSA-Y-1-60 | HSA-Y-2-20 | HSA-Y-2-40 |
|---|---|---|---|---|
| Lower Cut-Off-Frequency | 10 kHz | 10 kHz | 10 kHz | 10 kHz |
| Upper Cut-Off-Frequency | .0 GHz | 1.1 GHz | 2 GHz | 1.9 GHz |
| Rise/Fall Time | 330 ps | 320 ps | 175 ps | 185 ps |
| Gain | 40 dB (× 100) | 60 dB (× 1,000) | 20 dB (× 10) | 40 dB (× 100) |
| Transimpedance* | 5,000 V/A | 50,000 V/A | 500 V/A | 5,000 V/A |
| Input Noise [/√Hz]** | 330 pV (6.6 pA) | 330 pV (6.6 pA) | 680 pV (13.6 pA) | 650 pV (13 pA) |
| Input VSWR | 1.45 : 1 | 1.4 : 1 | 1.15 : 1 | 1.2 : 1 |
| Maximum Output Voltage @ 50 Ω | 2.0 VPP | 2.3 VPP | 2.5 VPP | 1.7 VPP |
| Output VSWR | 1.6 : 1 | 1.4 : 1 | 2.5 : 1 | 1.8 : 1 |
| Power Requirements | ±15 V, +200 / −10 mA, typ. | ±15 V, +180 / −10 mA, typ. | ±15 V, +160 / −10 mA, typ. | ±15 V, +185 / −10 mA, typ. |
| Input | 50 Ω, SMA | |||
| Output | Two identical signal outputs, 50 Ω, SMA | |||
| Monitor Output | Gain: 26 dB (x 20), | transimpedance*: 1 | kV/A, output voltage range: ±10 V (RLoad > | 10 kΩ), bandwidth: DC – 100 kHz |
| Dimensions | 110 x 70 x 25 mm | (L x W x H), | weight | 180 g (0.41 lb) |
